dsh-process-guard
DeepSeek Harness 套件会拒绝按镜像名称终止浏览器或该套件自身宿主进程的 shell 命令。
插件会安装到这里；不确定时保持 web。
npx -y @deepseek-ai/dsh plugin --profile web add github:CetOeil/dsh-process-guard#0c9e01bcf242b4ed6d5a84d185e1f7dfdcbf61e2Process Guard 以 dsh-process-guard 发布，当前版本为 0.2.1。Plugin Hub 会校验它的 manifest，并保存精确安装来源，便于复现安装结果。
A DeepSeek Harness bundle that refuses shell commands which terminate processes by image name — the failure mode that closes the Harness GUI window in the middle of a turn.
The DSH Web GUI is a browser client on http://127.0.0.1:3080, and the harness
server is a node process. Get-Process chrome | Stop-Process -Force therefore
kills the harness's own host processes. This plugin inspects every shell tool
call before it runs and refuses that shape, while leaving explicit-PID kills and
-PassThru handle kills untouched.
Error: process-guard: blocked - this terminates "chrome", "msedge" after selecting
it by image name. That image may host the DSH GUI (http://127.0.0.1:3080), harness,
or terminal, so killing it can close the UI and interrupt the session. Kill only a
process you started: $p = Start-Process ... -PassThru; if (-not $p.WaitForExit(25000))
{ $p.Kill() }; or target a known PID with -Id.
On 2026-09-18 a session running headless-Chrome screenshot verification cleaned up between attempts with a blanket kill:
Get-Process chrome,msedge -ErrorAction SilentlyContinue | Stop-Process -Force -ErrorAction SilentlyContinue
That command terminated every Chrome process on the machine — including the one
hosting the DSH Web GUI. The window disappeared, the client connection dropped,
and the harness recorded the turn as interrupted with a tool result of
"outcome unknown". A later command, approved through the normal escalation
prompt, began and ended with the same blanket kill and produced the same result
about three seconds after the approval was recorded. The approval was incidental:
it was the gate that let the command run, not the cause.
The audit trail shows an approval/asked with no matching approval/decided,
followed by turn/end … interrupted, and the harness server itself never
crashed — which is exactly why this needs a guard on the tool path rather than a
fix somewhere else. docs/DESIGN.md records the full reasoning.
| Command | Verdict |
|---|---|
Get-Process chrome | Stop-Process -Force | refused (protected-image-kill) |
Stop-Process -Name msedge, taskkill /IM chrome.exe /F, killall chrome, pkill -f chrome | refused |
Get-Process node | Stop-Process -Force, Stop-Process -Name WindowsTerminal | refused |
Get-Process | Stop-Process -Force, Stop-Process -Name '*', taskkill /F /IM *, kill -9 0 | refused (blanket selection) |
spps -Name chrome, wmic … call terminate, Get-CimInstance Win32_Process -Filter "Name='chrome.exe'" | Invoke-CimMethod -MethodName Terminate | refused |
sudo killall chrome, time pkill chrome, nohup killall chrome, xargs killall, FOO=1 killall chrome | refused (the wrapper runs the command) |
for f in *; do killall chrome; done, if [ -f x ]; then killall chrome; fi | refused (the keyword starts a command) |
Invoke-Expression "Stop-Process -Name chrome", cmd /c "taskkill /IM * /F", zsh -c 'killall chrome', python -c "os.system('killall chrome')", literal -EncodedCommand | refused (indirect-execution) |
Stop-Process -Id 42, kill 4711 | allowed (explicit-pid) |
$p = Start-Process chrome -PassThru; … $p.Kill() | allowed (handle you own) |
$p = Get-Process chrome; $p.Kill(), $p = Get-Process chrome; $p | % { $_.Kill() } | refused (the name-selected object is tracked across statements) |
$x = 'chrome'; Stop-Process -Name $x | refused (a literal image name stays one through a variable) |
Get-Process chrome | Where-Object { $_.CommandLine -like '*--headless*' } | Stop-Process | refused by default; allowed only with safeFilterAllows: true |
Get-Process notepad | Stop-Process | allowed (selected unprotected image, not a blanket enumeration) |
Stop-Process -Name notepad | allowed (not a protected image) |
Write-Output "Stop-Process -Name chrome" | allowed (text, not an invocation) |
Write-Output "$(Get-Date) Stop-Process -Name chrome" | allowed (only the substitution runs, and it is not a kill) |
find . -name "*.log" -exec grep -l chrome {} \; | allowed (-name here is find's, not a process selector) |
It also contributes a short system-prompt section stating the rule, so the model knows the constraint before it hits a refusal.
dsh plugin --profile web add dsh-process-guard
dsh plugin forwards to pnpm inside the profile and then appends the package to
dsh.profile.bundles, because the package declares dsh.bundle.patch. Confirm
the layer composed, then restart dsh web:
dsh --profile web --dump-config # look for a "# == dsh-process-guard" layer
From a checkout, install the directory instead of the registry name:
dsh plugin --profile web add /path/to/dsh-process-guard
A git URL works too, and needs no build: the repository root is the package.
dsh plugin --profile web add git+https://github.com/CetOeil/dsh-process-guard.git
The plugin has no runtime dependencies, so installation needs no build step
and no pnpm allowBuilds authorization. It requires a harness whose dsh-tools
exposes ctx.tools.guard(); this release is verified against dsh 0.1.5-rc.3,
recorded as engines.dsh. Treat that field as documentation rather than a gate:
npm and pnpm only evaluate the standard node/npm engine keys, and node-semver
cannot express "any prerelease at or above X" — a prerelease comparator admits
only prereleases of its own version tuple, which is why the declared range lists
0.1.5-rc.1 explicitly. The enforced gate is the runtime check: on a host
without ctx.tools.guard() the plugin throws at load instead of leaving an
apparently active but ineffective guard.
One pnpm 12 behaviour is worth knowing for the first days after a release: its
supply-chain release-age gate treats a freshly published version as too new. In
the default non-strict mode pnpm records the exception itself
(minimumReleaseAgeExclude in the profile's pnpm-workspace.yaml) and the
install proceeds; with minimumReleaseAgeStrict: true it stops at a prompt
instead. Either way the git install above is unaffected.
Defaults are the safe ones; the shipped cordis.patch.yml deliberately sets no
config: block. Override keys by copying the row into your own profile
cordis.patch.yml (see examples/override.cordis.patch.yml):
- id: process-guard
name: dsh-process-guard
config:
mode: ask # 'deny' (default) routes through ctx.tools.guard()
additionalTools: [remote_shell]
additionalProtectedImages: [custombrowser]
safeFilterAllows: false # default: require a PID or owned process handle
announce: true # add the system-prompt section
enabled: true
| Key | Default | Meaning |
|---|---|---|
enabled | true | Set false to disable inspection entirely. |
tools | common shell tool names | Replacement list of tools whose command argument is inspected. |
additionalTools | [] | Tool names added to the default list. |
protectedImages | cross-platform browsers + harness/terminal hosts | Replacement list of images that must never be killed by name. |
additionalProtectedImages | [] | Image names added to the built-in protected list. |
mode | deny | deny blocks the call; ask sends it to the approval prompt instead. |
safeFilterAllows | false | Opt into the positive CommandLine -like/-match '*--headless*' or --user-data-dir exception. Negated or -or filters remain blocked. |
announce | true | Contribute the system-prompt section. |
Use additionalTools and additionalProtectedImages for normal extension;
tools and protectedImages intentionally replace their defaults. Unknown keys,
mistyped booleans, invalid array entries, and empty safety lists are reported and
fall back to safe values, so a typo cannot quietly weaken the guard.
mode: deny is enforced through ctx.tools.guard(), which is monotonic — no
other guard can force-allow a call this one denied. mode: ask registers a
tools/pre-execute listener instead and lets you decide, with the reason shown.
Stop-Process -Name chrome. It must come back as
Error: process-guard: blocked - … and no pwsh process may have spawned.Stop-Process -Id <some pid> — that must still work.process-guard: deny mode on [pwsh, bash, terminal, …]; protected images: chrome, …. It goes to the
harness log, not necessarily to your terminal: cordis ships no console
exporter, so treat the two behavioural checks above as the verification.Local checks in this repository:
npm run check # tests + bundle + listing readiness + exact npm artifact
npm test # matcher corpus + plugin registration
npm run test:no-isolation # constrained sandboxes that block piped children
npm run verify:market # the README install command the hub looks for, plus manual steps
A sandbox that blocks piped child processes (both npm test, which spawns one
process per test file, and npm run verify:package, which runs npm pack as a
child) breaks npm run check for reasons unrelated to this package. Use
npm run test:no-isolation there, and run the three verification scripts
individually; only verify:package needs the wider permission.
This is a behavioral safety net, not a security boundary. It is a static heuristic over command text, and these bypass it:
Stop-Process -Name (Get-Content names.txt) is therefore allowed. Literal PowerShell
-EncodedCommand payloads are decoded and inspected, and a literal image name
held in a variable is resolved.cordis agent
preset mounts cordis_define / cordis_run, which execute host JavaScript
without ever calling pwsh or bash; a kill written there is not inspected.ssh host killall chrome runs on the other machine and
cannot close this one's GUI, so it is not refused.protectedImages.sudo, time, nohup, xargs, busybox, …), not a general model of
which programs execute their arguments.What it does cover is the realistic failure: an agent reaching for the obvious name-based cleanup. Treat a refusal as a signal to use a narrower command, not as proof that no destructive command can run.
dsh plugin --profile web remove dsh-process-guard
Or hot-disable it in your profile cordis.patch.yml without uninstalling:
- id: process-guard
disabled: true
docs/DESIGN.md — why the guard sits on the tool path, why not the sandbox
seam, and the full list of known bypasses.docs/PUBLISHING.md — the verified dsh-plugin.org listing requirements and the
release checklist.docs/agents-md-snippet.md — the same rule as prose, for users who prefer an
AGENTS.md instruction over a plugin (or want both layers).SECURITY.md — what this does not protect against, and what to report.npm run check # tests, bundle contract, listing readiness, packed-file audit
Two rules keep the matcher honest: every new refusal rule needs a corpus case in
test/matcher.test.js, and every new rule needs at least one allowed case that
proves it does not swallow legitimate commands. docs/DESIGN.md §5 explains the
two-view masking and the command-position check the matcher depends on.
The release workflow publishes on a GitHub Release whose tag exactly matches
v<package.json version>. Create a protected npm environment and add its
NPM_TOKEN secret, then publish release v0.2.0. That is also the only path
that produces a provenance attestation: --provenance is a cloud-CI feature
("when publishing from a supported cloud CI/CD system", per npm publish --help),
and the workflow already sets id-token: write for it.
For a manual first publish from a workstation, drop the flag — a local publish cannot attest:
npm run check
npm publish --access public
The npm name dsh-process-guard was unclaimed when this package was prepared.
Listing on dsh-plugin.org is automatic and needs no
pull request: the hub periodically scans public GitHub repositories carrying
the dsh-plugin topic, then reviews each one by hand. Its four stated
requirements are a public repository, that topic, a README containing
dsh plugin --profile web add <package>, and an apply(ctx) export.
npm run verify:market owns the install command — the requirement nothing else
covers — and prints the two GitHub-side steps it cannot check from here. The
manifest half of the contract is npm run verify, and the apply(ctx) export
needs no check: test/plugin.test.js imports it by name, so losing it fails
npm test. See docs/PUBLISHING.md for the full checklist.
The curated awesome-dsh-plugin
list is a separate registry with a pull-request flow; it is optional. Its CI
requires the repository to be at least one day old and the entry to be the single
file data/plugins/CetOeil__dsh-process-guard.yml:
url: https://github.com/CetOeil/dsh-process-guard
name: CetOeil/dsh-process-guard
category: security
description:
en: Blocks DSH shell calls that terminate protected browser, terminal, or harness processes by image name, wildcard, or unfiltered enumeration.
MIT — see LICENSE.