@fffangchenghao/dsh-latex-look
查看 LaTeX 页面实际呈现的效果：编译、将页面渲染为图像、将点或文本锚点映射回源代码行，并将页面与上一次构建进行差异比较。CLI、MCP server 和 DSH plugin 基于同一个核心。
插件会安装到这里；不确定时保持 web。
npx -y @deepseek-ai/dsh plugin --profile web add @fffangchenghao/dsh-latex-look@0.4.2Latex Look 以 @fffangchenghao/dsh-latex-look 发布，当前版本为 0.4.2。Plugin Hub 会校验它的 manifest，并保存精确安装来源，便于复现安装结果。
English · 简体中文
A page that compiles and still looks wrong, repaired in five edits
Left: compiles with zero errors. Right: after five sentences a reader could say out
loud — "remove the rules around the title", "this table is a grid, make it a
booktabs table", "that link runs off the page", "the figure is too wide". Try it
yourself in examples/broken-layout.
A DeepSeek Harness plugin that adds exactly one tool: latex_look.
An agent that only reads .tex source is blind: a document can compile with zero errors and still look wrong. latex_look compiles the document, renders the page as an image, maps any spot on that page back to the exact source line, and diffs what your last edit changed — in a single call.
┌─────────────┐ latex_look ┌──────────────┐
│ agent │ ─────────────► │ pdf → png │
│ (edits .tex)│ │ synctex │
└─────────────┘ ◄───────────── │ pixel diff │
▲ image + line └──────────────┘
└─────────────── verification ───────────┘
Read the case study: a 215-page LaTeX book, read the way a reader reads it — 163 figures, 129 equations, six classes of defect that compile cleanly.
Rendering, locating, and diffing are the implementation. The agent needs one coherent verb — "look at this page" — the same way a person does. latex_look compiles, renders, resolves, and diffs in a single call, so the loop is:
look → diagnose → edit .tex → look again → confirm the change → report
Requires Node ≥ 18, a TeX engine (xelatex/lualatex/pdflatex/latexmk or tectonic), synctex, and ghostscript.
This repository is the bundle: package.json declares dsh.bundle.patch, and cordis.patch.yml inserts one row.
git clone https://github.com/fangchenghao/latex-look
Then install it into the current profile (in the Harness, via the plugin manager):
plugin_manager action: install_bundle target: /absolute/path/to/latex-look
That adds the row latex-look and registers the latex_look tool. Replacing the sources of an already-installed package needs a Harness restart to load a fresh module generation.
Published on npm as @fffangchenghao/dsh-latex-look, so the same row also installs straight from the registry:
plugin_manager action: install_bundle target: @fffangchenghao/dsh-latex-look
Two different facts, and the plugin reports them separately because confusing them is how an update goes missing:
A newer release exists. The registry is asked once a day, in the background; when something newer is published, one line is appended to a tool reply. An offline machine sees nothing at all, and an unreachable registry is never reported as "up to date".
A newer release is already installed. This is the one that silently bites. An
updater replaces the package directory while the old code keeps running, so the
running code goes on reading its version out of a package.json that was swapped
underneath it — it reports the new number while executing the old code, and
everything looks current. The plugin therefore remembers the version it started with,
re-reads the disk at most once a minute, and when the two disagree says so:
note: @fffangchenghao/dsh-latex-look 0.4.2 is installed on disk, but this process is
still running 0.4.1 — restart DeepSeek Harness to load it.
The plugin does not update itself. Replacing the files of a running process is the
profile's job, not a tool's: an updater plugin already installed in the profile does
it, or you do it by hand. When the plugin can tell which profile it was installed
into, it prints the exact command — the profile name is read off its own path,
because they are called desktop and web and a guess sends you to an install that
does nothing:
dsh plugin --profile desktop add @fffangchenghao/dsh-latex-look@latest
core.mjs is not hot-reloaded, so a plugin update takes effect on the next start of
the harness, never mid-session.
From a checkout, both questions are available directly:
node bin/latex-look.mjs --version
node bin/latex-look.mjs --check-update
Tagging v* runs the test suite on Ubuntu with TeX and Ghostscript installed, verifies the tag matches package.json, and publishes to npm. The token comes from the NPM_TOKEN repository secret.
The tool gives the agent eyes. SKILL.md gives it the LaTeX knowledge to act on what it sees — a symptom → cause → fix playbook (a rule you want gone is usually \pagestyle/fancyhdr, not a stray \hline). Copy or symlink it into the skills root:
mkdir -p ~/.dsh/skills/latex-look
ln -sf "$PWD/SKILL.md" ~/.dsh/skills/latex-look/SKILL.md
node bin/latex-look.mjs book.tex --page 37
node bin/latex-look.mjs book.tex --text "表3.1"
node bin/latex-look.mjs book.tex --page 12 --compare previous --json
node bin/latex-look.mjs book.tex --page 1 --audit # what did the last edit break, anywhere?
The CLI runs the same engine as the plugin and needs no Harness, which makes it the fast way to check a change without reloading anything.
The same engine ships as a Model Context Protocol server, so a client that has never
heard of DSH can use it. It is the same look() and the same words in the reply — the
plugin is the Harness shape, this is the universal one.
{
"mcpServers": {
"latex-look": {
"command": "npx",
"args": ["-y", "@fffangchenghao/dsh-latex-look", "mcp"]
}
}
}
Put that in claude_desktop_config.json (Claude Desktop), ~/.cursor/mcp.json
(Cursor), or as a TOML block in ~/.codex/config.toml:
[mcp_servers.latex-look]
command = "npx"
args = ["-y", "@fffangchenghao/dsh-latex-look", "mcp"]
It exposes one tool, latex_look, with the same parameters as everywhere else:
file, page, text, pointX/pointY, compare, audit, sequence, dpi.
Pages come back as image content blocks, so the model sees the page itself.
Requirements are the usual ones — a TeX engine and ghostscript on PATH:
brew install --cask mactex-no-gui ghostscript # macOS
sudo apt install texlive-xetex ghostscript # Debian/Ubuntu
winget install MiKTeX.MiKTeX ArtifexSoftware.GhostScript # Windows
On Windows nothing has to be added to PATH: the plugin asks for gswin64c
(that is Ghostscript's real name there), and when that is not found it looks in
C:\Program Files\gs\gs*\bin, plus the TeX Live, MiKTeX and TinyTeX install
directories. If you would rather be explicit, point PATH at
C:\Program Files\gs\gs10.05.1\bin and it is used first.
Nothing is uploaded: every call compiles the document that is already on your disk.
Listed in the official MCP Registry as io.github.fangchenghao/latex-look, so clients that search the registry can install it by name, and on awesome-mcp-servers.
Three suites run on a clean checkout — they create their own fixtures and compile real documents, so expect a few minutes:
node test/smoke.mjs # unit level: problem parsing, PPM, raster diff, aux detection
node test/scenarios.mjs # 52 end-to-end cases driven through index.js
node test/scenarios-deep.mjs # 29 cases: multi-file papers, beamer, twocolumn, images,
# engine switching, the build cache, hostile inputs
node test/book-scenarios.mjs # 15 cases against a real 208-page book (164 .tex files)
node test/book-tasks.mjs # 18 real editing tasks on the same book (see below)
LATEX_LOOK_BOOK=/pristine/copy node test/book-tasks.mjs # point it at an unedited copy
The book suite needs a real book and is skipped unless you point it at one:
LATEX_LOOK_BOOK=/path/to/book node test/book-scenarios.mjs
These two suites matter most, because a real book is root → \input{main} →
\input{chap1}, with a custom .sty, 181 figures, a glossary and fancyhdr page
furniture.
book-scenarios checks the machinery on that book. book-tasks checks the
requests: each case is a sentence a user would say, applied to the copy and then
verified the way an agent verifies it — look, diff against the previous build, and
confirm the change is where the edit acts:
| user says | measured |
|---|---|
| 把页眉那条横线去掉 | 0.09%, bbox y=52 h=1 (a thin band at the top) |
| 页眉的线太细，加粗到 2pt | 0.27%, bbox y=52 h=3 |
| 链接的蓝色去掉 | 0.29%, bbox over the contents page |
| 行距调大一点 | 10.53%, 208 → 248 pages |
| 表格行距加大 | 9.07% |
| chap2 那个总结框太窄，放宽 | 7.39% |
| chap1 那个图太小，放大 | 10.57% |
| chap4 那组图对齐时右边空着 | 8.81% |
| 段落首行不要缩进 | 14.07% |
| 页边距太窄 | 13.32%, 208 → 226 pages |
| 正文字号改成 12pt | 11.63%, 208 → 226 pages |
| 目录只显示到章 | 2.19%, 208 → 207 pages |
Nothing in these cases is asserted about how the change looks — that is what the image is for. The assertions are: the build succeeded, a diff exists, and its bounding box is in the region the edit acts on.
Both end-to-end suites stub only @deepseek-ai/dsh-tools (it exists solely inside
the Harness) and call the real execute with real arguments, so they exercise the
argument handling and the exact text the model reads — not just lib/core.mjs.
That matters: several bugs found this way lived only in the formatting layer.
SyncTeX records the page a box was built on. A float that TeX moves to the next
page gets the previous page's number, so text: "Version 0.5" used to answer
"page 205" for a table that ships on 206 — and page 205 is a different chapter.
The tool now checks the PDF's own text layer (gs -sDEVICE=txtwrite, ~0.12 s a page)
and looks one and two pages either side; when it overrules SyncTeX it says so.
A compare call writes three images, but the one to show the user is
images.sideBySide: the page before on the left, the page after on the right, one
PNG. Finding the difference by eye across two separate files is the hardest part of
the job for someone who cannot read the source.
Writing a PNG needs no dependency — a signature, IHDR, one zlib IDAT, IEND, and
node:zlib supplies the compression. The composite costs about 0.3 s on an A4 page at
140 dpi, and only runs when there is something to compare.
Verifying an edit always costs a real compile; there is no way around that. But browsing pages of the same build should not:
| operation | 208-page book |
|---|---|
| first look (3 passes + glossary) | ~17 s |
| every look after that, sources unchanged | ~0.2 s |
A build is reused when the document, everything it \input/\includes (three
levels), its \includegraphics files and its aux files are unchanged (mtime and
size). A failing build is never reused. Pass fresh: true to bypass it.
Two consequences worth knowing:
.aux/.toc and corrupt each other — racing two processes on the 208-page book,
one of them died with no error message at all. Builds are now serialised in-process
by a promise queue and across processes by a lock file that carries the owner's
PID, so a killed run cannot wedge the document.-draftmode on the intermediate passes was measured and rejected: it saves about
2%, because the time is typesetting, not PDF writing. The ~16 s is TeX itself.
latex_look({
"file": "book.tex", // main .tex (required)
"page": 37, // optional, defaults to 1
"text": "表3.1", // optional: locate this string, show its page
"pointX": 240, // optional, with pointY: PDF points → source line
"pointY": 610,
"compare": "previous.pdf",// optional: diff against an earlier PDF
"dpi": 200, // optional, 50-300
"engine": "xelatex", // optional
"maxPasses": 3, // optional
"timeoutSeconds": 300, // optional
"fresh": false, // optional: ignore the build cache
"audit": false, // optional: whole-document layout audit vs the last run
"auditBlankMm": 30 // optional: how deep a bottom hole must be to count,
"sequence": "图" // optional: check that numbered labels stay in reading order
})
Returns:
problems — each with file, line, messagewarnings: LaTeX/Package/Class warnings plus Overfull/Underfull boxes, the usual cause of an ugly pagetoc: whether the document declares \tableofcontents and how many entries it actually produced (an empty TOC is reported as a problem, not a success). The declaration is found across \input/\include, so a one-line root that wraps \input{main} still worksaux: external tools it ran — makeglossaries, makeindex, biber, bibtex — chosen from the artifacts the first pass produced, not from the root file's text, so multi-file projects that keep \makeglossaries in an included preamble are handled toolocated: { file, line, page } for the text anchor or point you asked aboutdiff: changedRatio plus the bounding box of the change in PDF points, ready to feed back into pointX/pointYsequence: reading order of labels that start a line ("图 1-1", "Figure 3.2", …). A float is placed later than an inline object that follows it in the source, so floating one member of a numbered run makes the numbers go backwards — the one defect a per-page diff can never showaudit: page-level layout findings — pages that stop short of the deepest text in the book, pages that start low, nearly empty pages — compared with the baseline the previous audit left behind, so newFindings is exactly what the latest build broke. Running heads, rules and page numbers are detected and excluded first; otherwise a page number becomes "the lowest ink in the book" and every page looks brokenlatex_look compiles with -synctex=1, so every glyph carries a link to its source line. Then:
synctex edit -o page:x:y:file.pdf.tex sources for the string, then synctex view each hit to get its page and coordinatespointX/pointYCoordinates are PDF points (72/inch) with the origin at the top-left of the page.
page is the PDF page index, not the number printed on the page. In the test
book those differ by 10 (printed 130 = index 140), and the offset is different again
in the roman-numbered front matter. PDF page labels would let the tool translate, but
LaTeX only writes them on request, so an agent that takes a page number from a user
must confirm it against the rendered page first.\pagestyle{headings}, fancyhdr) has no glyph of its own, so it resolves to nearby text. Combine the coordinates with LaTeX knowledge — that is what SKILL.md is for..aux/.toc/.out/… — a document with \tableofcontents needs ≥ 2 passes, and latex_look reports a problem if the TOC comes out empty.\input/\include three levels deep. \import/\subfile, unusual custom .latexmkrc recipes, and \includeonly are not understood.% in a file name defeats the TeX engine itself (! Emergency stop.), so no tool can help there. A % in a directory name is fine.engine accepts only the engines in this tool's list (auto or a known name); it is never passed to spawn unchecked.TMPDIR/latex-look-<pid>/ because the agent opens them after the call returns. Nothing prunes that directory.\input/\include targets, its \includegraphics files and its aux files. A .sty that changed, or a file pulled in through a macro rather than a literal \input{...}, is not tracked — pass fresh: true if you suspect a stale build.maxPasses: 1 on a document with \tableofcontents is reported as an error when no existed before, and as a warning otherwise: the file is written the TOC page is typeset, so one pass reliably produces a blank TOC page.MIT
.toc.toc