dsh-vibe-intent-compiler

Vibe Intent Compiler

面向 DeepSeek Harness 中 Vibe Coders 的保守型意图编译器：在不虚构细节的前提下澄清杂乱草稿，然后将结果填回编辑器。

目标 Profile

插件会安装到这里；不确定时保持 web。

npx -y @deepseek-ai/dsh plugin --profile web add github:Shhaaawwww/vibe-intent-compiler#0ad5fb593b13ba086d7bc894418a15d33599233d

兼容性与来源证明

Vibe Intent Compiler 以 dsh-vibe-intent-compiler 发布，当前版本为 0.4.0。Plugin Hub 会校验它的 manifest，并保存精确安装来源，便于复现安装结果。

DSH 兼容范围: *
运行环境: web
发布来源: github
Registry 更新时间: 2026/8/25

版本

0.4.0stable

2026/8/25

README

Vibe Intent Compiler

简体中文

A one-click DeepSeek Harness plugin that turns a Vibe Coder's messy draft into a concise, faithful, and actionable instruction—without inventing details.

This is not a general-purpose prompt enhancer. It reads the complete, unsent draft in the DeepSeek Harness composer, reorganizes only what the user actually said, and fills the result back in place. When the user explicitly selects an @file, the plugin may use that file only to resolve references already present in the draft. The user reviews, edits, and sends the result.

Version 0.4 is the Faithful Context Beta: model rewriting is surrounded by deterministic input and output checks. If a safe, faithful result cannot be verified, the original draft stays unchanged.

Install

Requirements:

Node.js 22.19.x or 24+ (^22.19.0 || >=24.0.0).
DeepSeek Harness 0.1.1-rc.2 or later.
pnpm available on PATH. Harness uses it internally to manage profile plugins, even when Harness itself was installed with npm or launched through npx.
A default model configured in Harness.

npm install -g @deepseek-ai/dsh pnpm
pnpm --version
dsh plugin --profile web add "github:Shhaaawwww/vibe-intent-compiler#v0.4.0"
dsh web

The plugin command must complete successfully before starting the Web UI. Open or create a conversation; the ✦ Clarify button appears in the conversation composer, not on the landing page.

If you run Harness through npx:

npm install -g pnpm
npx @deepseek-ai/dsh plugin --profile web add "github:Shhaaawwww/vibe-intent-compiler#v0.4.0"
npx @deepseek-ai/dsh web

Installation troubleshooting

If Harness reports pnpm not found on PATH, the plugin has not been installed yet. Stop the Web UI, then run:

npm install -g pnpm
pnpm --version
dsh plugin --profile web add "github:Shhaaawwww/vibe-intent-compiler#v0.4.0"
dsh web

Warnings about node-domexception or peer dependencies are non-fatal when installation finishes with Done. If the button is still missing, restart dsh web, enter a conversation, and hard-refresh the page.

Use

Write a natural, fragmented, or self-correcting request in the composer.
Optionally type @ and pick up to three files from Harness. Only picked file chips are read; plain paths and manually typed mentions are not.
Click ✦ Clarify. The button shows how many files will be used.
Review the rewritten draft, edit it if needed, and send it yourself.

Example:

Before: Login keeps breaking lately, maybe it's the token. Make the UI nicer too—actually, leave the UI alone for now.

After: Fix the recent recurring login issue. Treat the token as a possible cause to investigate, and do not change the UI.

What makes it different

Uses only information explicitly present in the draft.
Treats later corrections as replacements only when they conflict with earlier wording.
Removes withdrawn ideas while preserving constraints, preferences, and uncertainty.
Preserves code, commands, paths, URLs, error messages, identifiers, schema keys, and technical terms.
Verifies protected text after rewriting and rejects results that omit it or introduce a new @reference.
Does not invent project facts, files, frameworks, implementation details, steps, tests, acceptance criteria, features, or permissions.
Can resolve an existing name or vague reference from explicitly selected files without searching the project, following imports, or starting an agent loop.
Keeps short inputs short; normal output is limited to roughly twice the effective source length.
Never executes the task or sends the message automatically.

Boundaries and privacy

Version 0.4 rewrites the complete draft, not a selected range.
It does not use a double-space shortcut, avoiding conflicts with IMEs, code, and Markdown.
It uses the default provider and model already configured in Harness, stores no additional API key, and explicitly requests low reasoning instead of inheriting the conversation's reasoning effort.
File context is deterministic, not agentic: only valid file chips recorded by the Harness composer are read. Structured chip offsets are verified, so references work beside Chinese text or punctuation while manually typed @text is not treated as a selected file.
Directories, binary/non-UTF-8 files, workspace escapes, and symlink escapes are rejected.
Sensitive paths such as .env, credential/secret files, SSH/AWS/Git metadata, and private-key formats are blocked. The draft and selected file text are also checked for common credential patterns before they can reach the model.
At most three files are accepted, up to 24 KiB each and 48 KiB in total. Files are never silently truncated; a rejected reference leaves the draft unchanged.
Selected file contents are sent to the same configured model provider as the draft. The plugin does not persist a separate copy, but the provider's own retention policy still applies.
Sensitive-content detection is a conservative, best-effort guard—not a secret manager. Never select a file that may contain credentials or private data.
The result must retain selected references and detectable code, commands, URLs, paths, and identifiers. It must not introduce a new @reference or copy a substantial file line. Failed validation leaves the draft unchanged.
If the draft changes during rewriting, the stale result is discarded instead of overwriting new input.
The raw draft is excluded from the command input log. The rewritten result remains in the Harness session as the command result.
Drafts longer than 20,000 characters are left unchanged rather than silently truncated.

Local installation

dsh plugin --profile web add /absolute/path/to/vibe-intent-compiler
dsh web

Prebuilt artifacts are committed, so installation does not run build scripts.

For vulnerability reporting and the supported security boundary, see SECURITY.md.

License

MIT. See LICENSE.

README

Vibe Intent Compiler

简体中文

A one-click DeepSeek Harness plugin that turns a Vibe Coder's messy draft into a concise, faithful, and actionable instruction—without inventing details.

Install

Requirements:

Node.js 22.19.x or 24+ (^22.19.0 || >=24.0.0).
DeepSeek Harness 0.1.1-rc.2 or later.
pnpm available on PATH. Harness uses it internally to manage profile plugins, even when Harness itself was installed with npm or launched through npx.
A default model configured in Harness.

npm install -g @deepseek-ai/dsh pnpm
pnpm --version
dsh plugin --profile web add "github:Shhaaawwww/vibe-intent-compiler#v0.4.0"
dsh web

The plugin command must complete successfully before starting the Web UI. Open or create a conversation; the ✦ Clarify button appears in the conversation composer, not on the landing page.

If you run Harness through npx:

npm install -g pnpm
npx @deepseek-ai/dsh plugin --profile web add "github:Shhaaawwww/vibe-intent-compiler#v0.4.0"
npx @deepseek-ai/dsh web

Installation troubleshooting

If Harness reports pnpm not found on PATH, the plugin has not been installed yet. Stop the Web UI, then run:

npm install -g pnpm
pnpm --version
dsh plugin --profile web add "github:Shhaaawwww/vibe-intent-compiler#v0.4.0"
dsh web

Use

Write a natural, fragmented, or self-correcting request in the composer.
Optionally type @ and pick up to three files from Harness. Only picked file chips are read; plain paths and manually typed mentions are not.
Click ✦ Clarify. The button shows how many files will be used.
Review the rewritten draft, edit it if needed, and send it yourself.

Example:

Before: Login keeps breaking lately, maybe it's the token. Make the UI nicer too—actually, leave the UI alone for now.

After: Fix the recent recurring login issue. Treat the token as a possible cause to investigate, and do not change the UI.

What makes it different

Uses only information explicitly present in the draft.
Treats later corrections as replacements only when they conflict with earlier wording.
Removes withdrawn ideas while preserving constraints, preferences, and uncertainty.
Preserves code, commands, paths, URLs, error messages, identifiers, schema keys, and technical terms.
Verifies protected text after rewriting and rejects results that omit it or introduce a new @reference.
Does not invent project facts, files, frameworks, implementation details, steps, tests, acceptance criteria, features, or permissions.
Can resolve an existing name or vague reference from explicitly selected files without searching the project, following imports, or starting an agent loop.
Keeps short inputs short; normal output is limited to roughly twice the effective source length.
Never executes the task or sends the message automatically.

Boundaries and privacy

Version 0.4 rewrites the complete draft, not a selected range.
It does not use a double-space shortcut, avoiding conflicts with IMEs, code, and Markdown.
It uses the default provider and model already configured in Harness, stores no additional API key, and explicitly requests low reasoning instead of inheriting the conversation's reasoning effort.
File context is deterministic, not agentic: only valid file chips recorded by the Harness composer are read. Structured chip offsets are verified, so references work beside Chinese text or punctuation while manually typed @text is not treated as a selected file.
Directories, binary/non-UTF-8 files, workspace escapes, and symlink escapes are rejected.
Sensitive paths such as .env, credential/secret files, SSH/AWS/Git metadata, and private-key formats are blocked. The draft and selected file text are also checked for common credential patterns before they can reach the model.
At most three files are accepted, up to 24 KiB each and 48 KiB in total. Files are never silently truncated; a rejected reference leaves the draft unchanged.
Selected file contents are sent to the same configured model provider as the draft. The plugin does not persist a separate copy, but the provider's own retention policy still applies.
Sensitive-content detection is a conservative, best-effort guard—not a secret manager. Never select a file that may contain credentials or private data.
The result must retain selected references and detectable code, commands, URLs, paths, and identifiers. It must not introduce a new @reference or copy a substantial file line. Failed validation leaves the draft unchanged.
If the draft changes during rewriting, the stale result is discarded instead of overwriting new input.
The raw draft is excluded from the command input log. The rewritten result remains in the Harness session as the command result.
Drafts longer than 20,000 characters are left unchanged rather than silently truncated.

Local installation

dsh plugin --profile web add /absolute/path/to/vibe-intent-compiler
dsh web

Prebuilt artifacts are committed, so installation does not run build scripts.

For vulnerability reporting and the supported security boundary, see SECURITY.md.

License

MIT. See LICENSE.

Vibe Intent Compiler

兼容性与来源证明

版本

相关插件

Vibe Intent Compiler

README

Vibe Intent Compiler

Install

Installation troubleshooting

Use

What makes it different

Boundaries and privacy

Local installation

License

兼容性与来源证明

版本

相关插件

相关插件

相关插件

README

Vibe Intent Compiler

Install

Installation troubleshooting

Use

What makes it different

Boundaries and privacy

Local installation

License