dsh-ssh-vault

Ssh Vault

用于 DeepSeek Harness 的加密 SSH 主机保管库和面向模型的 SSH 工具

目标 Profile

插件会安装到这里；不确定时保持 web。

npx -y @deepseek-ai/dsh plugin --profile web add github:scientificmaniac/dsh-ssh-vault#90d1e114d0cb60ece22224b062df5f71fce4da59

兼容性与来源证明

Ssh Vault 以 dsh-ssh-vault 发布，当前版本为 1.6.9。Plugin Hub 会校验它的 manifest，并保存精确安装来源，便于复现安装结果。

DSH 兼容范围: *
运行环境: web
发布来源: github
Registry 更新时间: 2026/10/16

版本

1.6.9stable

2026/10/16

1.5.0stable

2026/10/16

DeepSeek Harness Plugin Hub

← Plugins

dsh-ssh-vault

Ssh Vault

用于 DeepSeek Harness 的加密 SSH 主机保管库和面向模型的 SSH 工具

目标 Profile

插件会安装到这里；不确定时保持 web。

npx -y @deepseek-ai/dsh plugin --profile web add github:scientificmaniac/dsh-ssh-vault#90d1e114d0cb60ece22224b062df5f71fce4da59

README

dsh-ssh-vault

English | 简体中文

Encrypted SSH host vault for the DeepSeek Harness: the agent works with host aliases, while the address, port, account, and password stay in an AES-256-GCM vault whose key is wrapped by Windows DPAPI.

A Host plugin for the DeepSeek Harness that lets an agent drive SSH without ever holding the credentials. The model sees vm-centos; it never sees 192.0.2.10, and it cannot read the password back out of the vault.

Typical setup: a Windows machine managing local Linux VMs, out-of-band management interfaces, and Windows targets.

Zero runtime dependencies — it drives the system OpenSSH client and nothing else.
A plaintext password never reaches the disk. It is decrypted in memory, handed to ssh through SSH_ASKPASS, and dropped when the connection ends.
Failure attribution that names the layer — local key problem / public key not installed / wrong password / firewall drop are reported as separate conclusions.
Long tasks that do not hold a tool call — remote detach (detach) and condition waiting (wait_for), so an ssh call stops being a poller.

Note on language: tool descriptions and the configuration surface are English. The diagnostic notes the plugin prints at runtime are currently Chinese; internationalising them is tracked work.

Tools

Tool	Purpose
`ssh_hosts`	Manage vault entries: `list` / `show` / `add` / `update` / `remove`
`ssh_run`	Run a command; supports `sudo`, `run_in_background`, `detach`, `wait_for`, `bindAddress`
`ssh_transfer`	Upload and download over SCP, with the same `bindAddress` support
`ssh_probe`	Connectivity self-check that adapts its commands to the target's shell

Install

Package name dsh-ssh-vault, bundle row id ssh-vault.

Requirements

Windows 10 1809+ / Windows 11 with the OpenSSH Client enabled. Check with ssh -V — it should print OpenSSH_for_Windows_9.x. If missing: Settings → System → Optional features → Add a feature → OpenSSH Client.
DSH Desktop with dsh.bundle.patch support (the 0.2.0-rc series is verified).

Option A — install from a directory (recommended)

Copy the package directory to the target machine, for example D:\dsh-plugins\dsh-ssh-vault.
Install it, by asking the agent or through the plugin manager UI:

plugin_manager  action=install_bundle  target="D:\dsh-plugins\dsh-ssh-vault"

Ask the agent to run ssh_hosts action=list; a result means the plugin is live.

Option B — install from an archive

Copy dsh-ssh-vault-<version>.tgz (or .zip) over, unpack it, then follow Option A. The tgz can sometimes be used directly as the install target; if it is rejected, unpack it first.

Local development

The profile links to this directory, so reinstall after changing files:

plugin_manager  action=install_bundle  target="<path to this checkout>"

Restart DSH Desktop after editing the source. The profile's patchReload is live, so changing only config in cordis.patch.yml takes effect immediately. But index.js and lib/*.js are loaded JavaScript modules: reinstalling the bundle — even removing and installing it again — does not replace the module generation in memory.

Security model

What is on disk

The vault lives in %DSH_HOME%\ssh-vault:

File	Contents	Plaintext secrets?
`vault.json`	Host inventory ciphertext (AES-256-GCM: `iv` / `tag` / `data`)	No
`key.json`	The 32-byte data key, wrapped by Windows DPAPI for the current user	No
`known_hosts`	Host public keys; host names are hashed via `HashKnownHosts`	No
`askpass.cmd` / `askpass.js`	Password-injection helper; fixed content	No

Address, port, account, and password all live inside the vault.json ciphertext. The data key is wrapped again by DPAPI, so copying the directory to another machine or another Windows user does not let anyone decrypt it.

Key protection

Chosen by keyProtection when the vault is first created and recorded in key.json:

dpapi (default) — the data key is protected by DPAPI; the boundary is "the current Windows user".
file — the data key is stored as base64 in key.json; the boundary degrades to filesystem permissions.
passphrase — the data key is derived from masterPassword with scrypt; no key material is stored.

If DPAPI is unavailable (for example a restricted sandbox that forbids child processes), the plugin falls back to file and says so, rather than failing silently.

How the password reaches ssh

Windows OpenSSH 9.x supports SSH_ASKPASS_REQUIRE=force: with no terminal it asks the program named by SSH_ASKPASS. The plugin generates askpass.cmd, which writes the password to stdout. The password therefore exists only in that one ssh child process's environment — never on a command line (so it cannot be seen in a process list) and never on disk.

Explicit boundaries

Not protected against: a malicious process already running as the current Windows user. It can read the DPAPI key and the process environment alike. That is the inherent limit of a local threat model.
Session log: tool arguments are written to the session record. The password parameter of ssh_hosts therefore enters the log before it is encrypted. To avoid that entirely, use the offline entry script or credentialRef — and read the trade-offs below, because credentialRef is not free.
The host argument of ssh_hosts add likewise enters the session log; recording a host cannot avoid that. Everyday calls afterwards use the alias only.

Settings UI

Settings → SSH Connections manages the vault without going through the conversation at all:

Lists every saved host with a masked address and account, its authentication type, shell, and whether a password and a sudo password are stored.
Add, edit, and delete connections. A password typed here travels in a same-origin POST body, so it never enters the session log — unlike ssh_hosts add password=....
Password or private key authentication. Pick the radio, then either type the password or upload the private key file; an uploaded key is written into the vault directory and its permissions tightened automatically, so you never have to fight file ACLs. A .pub file or a non-key file is rejected on the spot.
Test connection runs the same probe as ssh_probe and shows the result inline, including the failure attribution.

`/ssh` in the conversation

/ssh                 list every configured host
/ssh kali            probe one host and show the result
/ssh kali win10      probe several at once

The command runs on the host and its outcome lands in the session as a command node, so the model sees which environment you just activated without being told.

Usage

# Record a host (the password enters the session log here, then is encrypted)
ssh_hosts  action=add  alias=vm-centos  host=192.0.2.10  port=22
           username=root  password=...  description="Local CentOS VM"  tags=["vm","centos"]

# Everyday use — alias only
ssh_probe  host=vm-centos
ssh_run    host=vm-centos  command="systemctl status sshd"
ssh_transfer  host=vm-centos  direction=upload  local=./dist/app.tar  remote=/tmp/app.tar

ssh_hosts list masks addresses and accounts by default (192.0.*.*, r***); pass reveal=true to see the full values. The password is never returned under any circumstances — show only reports set (stored encrypted).

Long tasks: remote detach + condition waiting

For anything measured in minutes — upgrades, disk work, scans — use detach to run the command on the remote host, detached from the SSH session:

ssh_run  host=kali  command="apt -y full-upgrade"  sudo=true  detach=true
→ [dsh-ssh-vault] started in the background on the remote host: pid=6676
  [dsh-ssh-vault] log: /tmp/.dsh-ssh-<token>.log
  [dsh-ssh-vault] liveness: ps -p 6676 >/dev/null 2>&1 && echo ALIVE || echo GONE

The local call returns in about a second, and the remote process is independent of it: a dropped link, a cancelled call, or a proxy timeout all leave it running. This is more reliable than a long-lived local connection — the pid and the log stay on the remote host, ready to inspect later.

Then do not poll with sleep; wait once with wait_for:

ssh_run  host=kali  wait_for={path: "/tmp/dsh-upgrade.log", regex: "Upgrade complete", timeoutMs: 900000}

On success it returns the matching line; on timeout it exits 124 and says so. The wait can itself go to the background:

ssh_run  host=kali  wait_for={path: "/var/log/upgrade.log", regex: "complete"}  run_in_background=true

Having the command write its own completion marker makes the condition most reliable: command="...; echo DONE > /tmp/job.done" followed by wait_for={path: "/tmp/job.done"}. A full "start + wait" flow is then two calls instead of a dozen sleeps.

Privileged work: sudo without the conversation

Do not write echo <password> | sudo -S — that puts the password into the tool arguments, the session log, and the remote ps. Use sudo: true instead:

ssh_run  host=kali  command="apt update && apt -y full-upgrade"  sudo=true

The plugin takes the password from the vault and primes the sudo credential cache through SSH's standard input. The password therefore does not appear in:

tool arguments or the session log (the call only says sudo: true);
the local command line or the ssh process arguments;
the remote command line or the remote ps output (it travels on stdin and is never written down).

When the host has no separate password, the login password is reused. When the sudo password differs, store it with ssh_hosts action=update sudoPassword=.... A failed prime reports "the stored password may not be this account's sudo password, or sudoers requires a tty" rather than leaving you guessing.

If a command writes sudo -S while sudo: true is not set, the result carries a hint. When sudo fails to obtain a password (a terminal is required), the diagnosis names it — and warns about the pipeline trap: the exit code of sudo ... | grep ... comes from the last stage, so a failed sudo can still return 0 and look like "empty output".

Passwords that never pass through the model: offline entry (recommended)

ssh_hosts add password=... writes the password into the session log. credentialRef avoids the conversation but puts the password into a plaintext YAML file. You do not have to choose. Enter it from your own terminal, straight into the encrypted vault:

cd <package directory>
node scripts/set-secret.mjs kali          # interactive, no echo
node scripts/set-secret.mjs kali --sudo   # set a separate sudo password
node scripts/set-secret.mjs kali --show   # inspect state only

Where the plaintext exists along this path:

Stage	Where the plaintext is
Entry	Only in your terminal (no echo); never through DSH, the model, or the session log
At rest	`vault.json` ciphertext (AES-256-GCM); the data key is wrapped by DPAPI
In use	Decrypted in memory, handed to `ssh` via askpass, discarded afterwards

So there is no need to "write it to disk and encrypt it back later": the plugin already decrypts only when needed. Introducing a temporary plaintext file would add an exposure window, not remove one.

Set $env:DSH_HOME before running the script if the harness uses a custom data directory, otherwise it will look in ~/.dsh.

Passwords that never pass through the conversation: credentialRef

Keep only the credential name in the host record and let the Harness credential store supply the value:

# 1) Add a line under refs in %DSH_HOME%\.credentials.yaml (or use the Harness credentials UI).
#    Quote the value: a bare number is parsed as an integer by YAML, and : # @ need quoting anyway.
refs:
  KALI_SSH_PASSWORD: "<password>"

# 2) Keep only the reference in the host record; setting it clears the vault's own copy
ssh_hosts  action=update  alias=kali  credentialRef=KALI_SSH_PASSWORD

The model and the conversation never see the password; ssh_hosts show reports only credentialRef: ... and password: missing.

Two limits worth knowing

That file is plaintext YAML. %DSH_HOME%\.credentials.yaml sits next to DEEPSEEK_API_KEY unencrypted. So credentialRef buys "no password in the conversation", not "encrypted at rest" — the two are mutually exclusive here: the vault's own password is ciphertext but passes through the conversation on entry; credentialRef avoids the conversation but lands in plaintext. The offline entry script satisfies both.

The provider reads credentials at startup. After adding or editing refs you must restart DSH Desktop; until then the host reports the reference as unavailable.

A stale reference does not brick the host. If credentialRef is unavailable but the vault still holds a password, the plugin falls back to it and says so in the result: "…is currently unavailable; this call fell back to the password stored in the vault." An environment problem therefore no longer looks like an authentication failure, and a running background task is not interrupted. It only errors when there is no password to fall back to either.

Out-of-band management: binding the source address

When a rule change would cut the management path, preset a source address on the host, or override it per call:

ssh_hosts  action=update  alias=kali  bindAddress=192.0.2.150
ssh_run    host=kali  command="ip addr add 192.0.2.150/24 dev eth0"  bindAddress=192.0.2.150

ssh uses -b; scp uses -o BindAddress=.

Windows targets and restricted environments

Set the shell to cmd or powershell

Windows' login shell is cmd.exe, where POSIX commands and multi-line scripts do not work:

ssh_hosts  action=update  alias=win-box  shell=powershell

The plugin then feeds the command through powershell -NoProfile -NonInteractive -Command - on standard input, and ssh_probe switches to whoami / version / boot time instead of failing on uname.

Observed: cmd echoes its version banner and prompt (Microsoft Windows [Version ...], C:\Users\...>) when reading commands from a pipe. It works, but the output is noisy. Use powershell when you want clean output — its self-check reads like identity: user@WIN10 / os: Microsoft Windows 10 Enterprise LTSC.

For real work, upload a .ps1 and run it with powershell -File, treating ssh_run as the transport. Two known encoding traps:

A .ps1 containing non-ASCII text must be UTF-8 with BOM, or PowerShell 5.1 parses it as ANSI and reports Unexpected token.
If console output is garbled, set [Console]::OutputEncoding = [Text.Encoding]::UTF8 and chcp 65001 at the top of the script.

Private keys: a public key cannot log in, and permissions must be tight

privateKeyPath is validated at save time: a .pub file, a PuTTY .ppk, or a file that is not a key at all is rejected immediately, instead of surfacing later as an authentication failure.
UNPROTECTED PRIVATE KEY FILE / Permissions for ... are too open means the ssh client refused to load the key itself — it has nothing to do with the account or password on the server. The plugin reports it as the first conclusion rather than blaming the password.
Where a restricted sandbox forbids changing ACLs, copy the key into the vault directory (%DSH_HOME%\ssh-vault) and point the host record at the copy.

Where Windows administrators' authorized_keys live

Windows OpenSSH applies Match Group administrators:

__PROGRAMDATA__/ssh/administrators_authorized_keys

For an administrator account the public key must go in that file (which must be readable only by Administrators and SYSTEM). Putting it in the user profile's .ssh\authorized_keys has no effect. The plugin states this explicitly when it receives Permission denied (publickey...).

Readable error paths

ssh escapes non-ASCII paths into forms like E:\\ai project\\\346\223\215\344\275\234\\id_rsa. The plugin decodes those octal escapes back to UTF-8, so the message is readable.

known_hosts and user configuration

The plugin always uses known_hosts inside the vault directory (with HashKnownHosts on) and never writes ~/.ssh, so the sandbox error Could not create directory 'C:\Users\...\.ssh' cannot come from it. Use knownHostsFile to relocate it, or sshConfigFile to point at — or (none) to suppress — the user-level ssh configuration.

Pipelines that hide output

Output from ssh ... | grep -v ... stays in the remote pipeline buffer; while the command hangs, nothing comes back. Workarounds:

use detach for long commands;
add stdbuf -oL on the remote side when you need filtered output live (stdbuf -oL journalctl -f | grep -v cron);
split into smaller commands, one call each, or write results to a remote file and read it back.

Configuration

Override the ssh-vault row's config in the profile's cordis.patch.yml (config is replaced wholesale, not deep-merged):

- id: ssh-vault
  config:
    keyProtection: dpapi        # dpapi | file | passphrase
    masterPassword: ''          # only for passphrase mode
    vaultDir: ''                # defaults to %DSH_HOME%\ssh-vault
    knownHostsFile: ''          # defaults to <vaultDir>\known_hosts
    sshConfigFile: ''           # passed to ssh -F
    sshExecutable: ssh
    scpExecutable: scp
    connectTimeoutSec: 10
    defaultTimeoutMs: 120000
    maxOutputBytes: 200000
    maskHostAddress: true       # false makes list/show reveal addresses by default

Troubleshooting

The plugin attributes failures in order — local key → server authentication → transport — and only says "wrong account or password" once the earlier causes are excluded.

Local key permissions / .pub used as a key / PPK: see "Private keys" above.
Permission denied (publickey): the public key is not installed on the target; see the Windows administrator note above.
Permission denied, please try again.: wrong password — fix it with ssh_hosts action=update.
Too many authentication failures: the client tried too many keys; use an explicit password or privateKeyPath.
Network unreachable / connection refused: check the subnet and firewall. If bindAddress is set, confirm the source address is still on an interface — an address added manually with ip addr add is lost on DHCP renewal.
Connection closed during handshake: usually a firewall or security group dropping packets, not authentication.
Host key changed (target rebuilt): delete its entry from the vault's known_hosts and reconnect.
Remote shell missing: set shell: /bin/sh for Linux, or cmd / powershell for Windows.
key.json cannot be decrypted: the key is bound to the Windows user that created it. If the inventory can be rebuilt, delete key.json and vault.json and re-enter the hosts.

Tests

Four regression scripts live in test/; only two need a real target, and none of them contains a credential.

npm test                   # the three host-free suites (this is what CI runs)

node test/diagnose.mjs     # shell translation, octal decoding, failure attribution
node test/unit.mjs         # ssh/scp argument construction, timeout/cancel output retention, wait/detach scripts
node test/background.mjs   # background job registration contract

# needs a real target
$env:LIVE_KALI_HOST = '<host>'
$env:LIVE_KALI_USER = '<user>'
$env:LIVE_KALI_PASS = '<password>'
$env:LIVE_WIN_HOST  = '<host>'
$env:LIVE_WIN_USER  = '<user>'
$env:LIVE_WIN_KEY   = '<private key path>'
node test/live.mjs
node test/selftest.mjs

The three host-free suites skip the cases that need to spawn a child process under a restricted sandbox (EPERM) and report the skip; everything else still runs. Each script uses its own temporary directory and never touches a real vault.

Current state: 89 host-free unit cases plus 25 live end-to-end cases against a Kali and a Windows 10 target.

Package layout

package.json            bundle manifest (dsh.bundle.patch points at cordis.patch.yml)
cordis.patch.yml        Loader row definition (id: ssh-vault)
index.js                plugin entry and the four model-facing tools
client.js               browser half: the Settings → SSH Connections page and the /ssh command surface
lib/vault-api.js        same-origin JSON routes behind the settings page
lib/vault.js            AES-256-GCM vault + DPAPI / scrypt key protection
lib/ssh.js              OpenSSH driver: argument construction, askpass, attribution, wait/detach scripts
lib/background.js       ctx.jobs background task adapter
scripts/set-secret.mjs  offline password entry (neither DSH nor the model is involved)
locale/{zh,en}.json     plugin manager title and description
icon.svg                plugin card icon
README.md               this file (English)
README.zh-CN.md         中文说明
CHANGELOG.md            version history
CONTRIBUTING.md         red lines, code style, testing requirements
SECURITY.md             security boundaries and vulnerability reporting
LICENSE                 MIT
test/                   regression; the first three need no host, the rest need a real target (not shipped)
dist/                   build artifacts, tgz / zip (not shipped)

The published file list is the files allowlist in package.json. Repack after changing files:

$env:npm_config_cache = "$PWD\.npm-cache"
npm pack --pack-destination dist
Remove-Item .npm-cache -Recurse -Force

Contributing

Issues and pull requests are welcome. Read CONTRIBUTING.md first — this plugin stores other people's passwords and runs commands on their machines, so that document defines the red lines and the testing requirements.

npm test

Version history is in CHANGELOG.md; security boundaries and reporting are in SECURITY.md.

License

MIT

兼容性与来源证明

Ssh Vault 以 dsh-ssh-vault 发布，当前版本为 1.6.9。Plugin Hub 会校验它的 manifest，并保存精确安装来源，便于复现安装结果。

DSH 兼容范围: *
运行环境: web
发布来源: github
Registry 更新时间: 2026/10/16

版本

1.6.9stable

2026/10/16

1.5.0stable

2026/10/16

README

dsh-ssh-vault

English | 简体中文

Encrypted SSH host vault for the DeepSeek Harness: the agent works with host aliases, while the address, port, account, and password stay in an AES-256-GCM vault whose key is wrapped by Windows DPAPI.

Typical setup: a Windows machine managing local Linux VMs, out-of-band management interfaces, and Windows targets.

Zero runtime dependencies — it drives the system OpenSSH client and nothing else.
A plaintext password never reaches the disk. It is decrypted in memory, handed to ssh through SSH_ASKPASS, and dropped when the connection ends.
Failure attribution that names the layer — local key problem / public key not installed / wrong password / firewall drop are reported as separate conclusions.
Long tasks that do not hold a tool call — remote detach (detach) and condition waiting (wait_for), so an ssh call stops being a poller.

Note on language: tool descriptions and the configuration surface are English. The diagnostic notes the plugin prints at runtime are currently Chinese; internationalising them is tracked work.

Tools

Tool	Purpose
`ssh_hosts`	Manage vault entries: `list` / `show` / `add` / `update` / `remove`
`ssh_run`	Run a command; supports `sudo`, `run_in_background`, `detach`, `wait_for`, `bindAddress`
`ssh_transfer`	Upload and download over SCP, with the same `bindAddress` support
`ssh_probe`	Connectivity self-check that adapts its commands to the target's shell

Install

Package name dsh-ssh-vault, bundle row id ssh-vault.

Requirements

Windows 10 1809+ / Windows 11 with the OpenSSH Client enabled. Check with ssh -V — it should print OpenSSH_for_Windows_9.x. If missing: Settings → System → Optional features → Add a feature → OpenSSH Client.
DSH Desktop with dsh.bundle.patch support (the 0.2.0-rc series is verified).

Option A — install from a directory (recommended)

Copy the package directory to the target machine, for example D:\dsh-plugins\dsh-ssh-vault.
Install it, by asking the agent or through the plugin manager UI:

plugin_manager  action=install_bundle  target="D:\dsh-plugins\dsh-ssh-vault"

Ask the agent to run ssh_hosts action=list; a result means the plugin is live.

Option B — install from an archive

Copy dsh-ssh-vault-<version>.tgz (or .zip) over, unpack it, then follow Option A. The tgz can sometimes be used directly as the install target; if it is rejected, unpack it first.

Local development

The profile links to this directory, so reinstall after changing files:

plugin_manager  action=install_bundle  target="<path to this checkout>"

Restart DSH Desktop after editing the source. The profile's patchReload is live, so changing only config in cordis.patch.yml takes effect immediately. But index.js and lib/*.js are loaded JavaScript modules: reinstalling the bundle — even removing and installing it again — does not replace the module generation in memory.

Security model

What is on disk

The vault lives in %DSH_HOME%\ssh-vault:

File	Contents	Plaintext secrets?
`vault.json`	Host inventory ciphertext (AES-256-GCM: `iv` / `tag` / `data`)	No
`key.json`	The 32-byte data key, wrapped by Windows DPAPI for the current user	No
`known_hosts`	Host public keys; host names are hashed via `HashKnownHosts`	No
`askpass.cmd` / `askpass.js`	Password-injection helper; fixed content	No

Key protection

Chosen by keyProtection when the vault is first created and recorded in key.json:

dpapi (default) — the data key is protected by DPAPI; the boundary is "the current Windows user".
file — the data key is stored as base64 in key.json; the boundary degrades to filesystem permissions.
passphrase — the data key is derived from masterPassword with scrypt; no key material is stored.

If DPAPI is unavailable (for example a restricted sandbox that forbids child processes), the plugin falls back to file and says so, rather than failing silently.

How the password reaches ssh

Explicit boundaries

Not protected against: a malicious process already running as the current Windows user. It can read the DPAPI key and the process environment alike. That is the inherent limit of a local threat model.
Session log: tool arguments are written to the session record. The password parameter of ssh_hosts therefore enters the log before it is encrypted. To avoid that entirely, use the offline entry script or credentialRef — and read the trade-offs below, because credentialRef is not free.
The host argument of ssh_hosts add likewise enters the session log; recording a host cannot avoid that. Everyday calls afterwards use the alias only.

Settings UI

Settings → SSH Connections manages the vault without going through the conversation at all:

Lists every saved host with a masked address and account, its authentication type, shell, and whether a password and a sudo password are stored.
Add, edit, and delete connections. A password typed here travels in a same-origin POST body, so it never enters the session log — unlike ssh_hosts add password=....
Password or private key authentication. Pick the radio, then either type the password or upload the private key file; an uploaded key is written into the vault directory and its permissions tightened automatically, so you never have to fight file ACLs. A .pub file or a non-key file is rejected on the spot.
Test connection runs the same probe as ssh_probe and shows the result inline, including the failure attribution.

`/ssh` in the conversation

/ssh                 list every configured host
/ssh kali            probe one host and show the result
/ssh kali win10      probe several at once

The command runs on the host and its outcome lands in the session as a command node, so the model sees which environment you just activated without being told.

Usage

# Record a host (the password enters the session log here, then is encrypted)
ssh_hosts  action=add  alias=vm-centos  host=192.0.2.10  port=22
           username=root  password=...  description="Local CentOS VM"  tags=["vm","centos"]

# Everyday use — alias only
ssh_probe  host=vm-centos
ssh_run    host=vm-centos  command="systemctl status sshd"
ssh_transfer  host=vm-centos  direction=upload  local=./dist/app.tar  remote=/tmp/app.tar

Long tasks: remote detach + condition waiting

For anything measured in minutes — upgrades, disk work, scans — use detach to run the command on the remote host, detached from the SSH session:

ssh_run  host=kali  command="apt -y full-upgrade"  sudo=true  detach=true
→ [dsh-ssh-vault] started in the background on the remote host: pid=6676
  [dsh-ssh-vault] log: /tmp/.dsh-ssh-<token>.log
  [dsh-ssh-vault] liveness: ps -p 6676 >/dev/null 2>&1 && echo ALIVE || echo GONE

Then do not poll with sleep; wait once with wait_for:

ssh_run  host=kali  wait_for={path: "/tmp/dsh-upgrade.log", regex: "Upgrade complete", timeoutMs: 900000}

On success it returns the matching line; on timeout it exits 124 and says so. The wait can itself go to the background:

ssh_run  host=kali  wait_for={path: "/var/log/upgrade.log", regex: "complete"}  run_in_background=true

Privileged work: sudo without the conversation

Do not write echo <password> | sudo -S — that puts the password into the tool arguments, the session log, and the remote ps. Use sudo: true instead:

ssh_run  host=kali  command="apt update && apt -y full-upgrade"  sudo=true

The plugin takes the password from the vault and primes the sudo credential cache through SSH's standard input. The password therefore does not appear in:

tool arguments or the session log (the call only says sudo: true);
the local command line or the ssh process arguments;
the remote command line or the remote ps output (it travels on stdin and is never written down).

If a command writes sudo -S while sudo: true is not set, the result carries a hint. When sudo fails to obtain a password (a terminal is required), the diagnosis names it — and warns about the pipeline trap: the exit code of sudo ... | grep ... comes from the last stage, so a failed sudo can still return 0 and look like "empty output".

Passwords that never pass through the model: offline entry (recommended)

cd <package directory>
node scripts/set-secret.mjs kali          # interactive, no echo
node scripts/set-secret.mjs kali --sudo   # set a separate sudo password
node scripts/set-secret.mjs kali --show   # inspect state only

Where the plaintext exists along this path:

Stage	Where the plaintext is
Entry	Only in your terminal (no echo); never through DSH, the model, or the session log
At rest	`vault.json` ciphertext (AES-256-GCM); the data key is wrapped by DPAPI
In use	Decrypted in memory, handed to `ssh` via askpass, discarded afterwards

Set $env:DSH_HOME before running the script if the harness uses a custom data directory, otherwise it will look in ~/.dsh.

Passwords that never pass through the conversation: credentialRef

Keep only the credential name in the host record and let the Harness credential store supply the value:

# 1) Add a line under refs in %DSH_HOME%\.credentials.yaml (or use the Harness credentials UI).
#    Quote the value: a bare number is parsed as an integer by YAML, and : # @ need quoting anyway.
refs:
  KALI_SSH_PASSWORD: "<password>"

# 2) Keep only the reference in the host record; setting it clears the vault's own copy
ssh_hosts  action=update  alias=kali  credentialRef=KALI_SSH_PASSWORD

The model and the conversation never see the password; ssh_hosts show reports only credentialRef: ... and password: missing.

Two limits worth knowing

That file is plaintext YAML. %DSH_HOME%\.credentials.yaml sits next to DEEPSEEK_API_KEY unencrypted. So credentialRef buys "no password in the conversation", not "encrypted at rest" — the two are mutually exclusive here: the vault's own password is ciphertext but passes through the conversation on entry; credentialRef avoids the conversation but lands in plaintext. The offline entry script satisfies both.

The provider reads credentials at startup. After adding or editing refs you must restart DSH Desktop; until then the host reports the reference as unavailable.

A stale reference does not brick the host. If credentialRef is unavailable but the vault still holds a password, the plugin falls back to it and says so in the result: "…is currently unavailable; this call fell back to the password stored in the vault." An environment problem therefore no longer looks like an authentication failure, and a running background task is not interrupted. It only errors when there is no password to fall back to either.

Out-of-band management: binding the source address

When a rule change would cut the management path, preset a source address on the host, or override it per call:

ssh_hosts  action=update  alias=kali  bindAddress=192.0.2.150
ssh_run    host=kali  command="ip addr add 192.0.2.150/24 dev eth0"  bindAddress=192.0.2.150

ssh uses -b; scp uses -o BindAddress=.

Windows targets and restricted environments

Set the shell to cmd or powershell

Windows' login shell is cmd.exe, where POSIX commands and multi-line scripts do not work:

ssh_hosts  action=update  alias=win-box  shell=powershell

Observed: cmd echoes its version banner and prompt (Microsoft Windows [Version ...], C:\Users\...>) when reading commands from a pipe. It works, but the output is noisy. Use powershell when you want clean output — its self-check reads like identity: user@WIN10 / os: Microsoft Windows 10 Enterprise LTSC.

For real work, upload a .ps1 and run it with powershell -File, treating ssh_run as the transport. Two known encoding traps:

A .ps1 containing non-ASCII text must be UTF-8 with BOM, or PowerShell 5.1 parses it as ANSI and reports Unexpected token.
If console output is garbled, set [Console]::OutputEncoding = [Text.Encoding]::UTF8 and chcp 65001 at the top of the script.

Private keys: a public key cannot log in, and permissions must be tight

privateKeyPath is validated at save time: a .pub file, a PuTTY .ppk, or a file that is not a key at all is rejected immediately, instead of surfacing later as an authentication failure.
UNPROTECTED PRIVATE KEY FILE / Permissions for ... are too open means the ssh client refused to load the key itself — it has nothing to do with the account or password on the server. The plugin reports it as the first conclusion rather than blaming the password.
Where a restricted sandbox forbids changing ACLs, copy the key into the vault directory (%DSH_HOME%\ssh-vault) and point the host record at the copy.

Where Windows administrators' authorized_keys live

Windows OpenSSH applies Match Group administrators:

__PROGRAMDATA__/ssh/administrators_authorized_keys

Readable error paths

ssh escapes non-ASCII paths into forms like E:\\ai project\\\346\223\215\344\275\234\\id_rsa. The plugin decodes those octal escapes back to UTF-8, so the message is readable.

known_hosts and user configuration

Pipelines that hide output

Output from ssh ... | grep -v ... stays in the remote pipeline buffer; while the command hangs, nothing comes back. Workarounds:

use detach for long commands;
add stdbuf -oL on the remote side when you need filtered output live (stdbuf -oL journalctl -f | grep -v cron);
split into smaller commands, one call each, or write results to a remote file and read it back.

Configuration

Override the ssh-vault row's config in the profile's cordis.patch.yml (config is replaced wholesale, not deep-merged):

- id: ssh-vault
  config:
    keyProtection: dpapi        # dpapi | file | passphrase
    masterPassword: ''          # only for passphrase mode
    vaultDir: ''                # defaults to %DSH_HOME%\ssh-vault
    knownHostsFile: ''          # defaults to <vaultDir>\known_hosts
    sshConfigFile: ''           # passed to ssh -F
    sshExecutable: ssh
    scpExecutable: scp
    connectTimeoutSec: 10
    defaultTimeoutMs: 120000
    maxOutputBytes: 200000
    maskHostAddress: true       # false makes list/show reveal addresses by default

Troubleshooting

The plugin attributes failures in order — local key → server authentication → transport — and only says "wrong account or password" once the earlier causes are excluded.

Local key permissions / .pub used as a key / PPK: see "Private keys" above.
Permission denied (publickey): the public key is not installed on the target; see the Windows administrator note above.
Permission denied, please try again.: wrong password — fix it with ssh_hosts action=update.
Too many authentication failures: the client tried too many keys; use an explicit password or privateKeyPath.
Network unreachable / connection refused: check the subnet and firewall. If bindAddress is set, confirm the source address is still on an interface — an address added manually with ip addr add is lost on DHCP renewal.
Connection closed during handshake: usually a firewall or security group dropping packets, not authentication.
Host key changed (target rebuilt): delete its entry from the vault's known_hosts and reconnect.
Remote shell missing: set shell: /bin/sh for Linux, or cmd / powershell for Windows.
key.json cannot be decrypted: the key is bound to the Windows user that created it. If the inventory can be rebuilt, delete key.json and vault.json and re-enter the hosts.

Tests

Four regression scripts live in test/; only two need a real target, and none of them contains a credential.

npm test                   # the three host-free suites (this is what CI runs)

node test/diagnose.mjs     # shell translation, octal decoding, failure attribution
node test/unit.mjs         # ssh/scp argument construction, timeout/cancel output retention, wait/detach scripts
node test/background.mjs   # background job registration contract

# needs a real target
$env:LIVE_KALI_HOST = '<host>'
$env:LIVE_KALI_USER = '<user>'
$env:LIVE_KALI_PASS = '<password>'
$env:LIVE_WIN_HOST  = '<host>'
$env:LIVE_WIN_USER  = '<user>'
$env:LIVE_WIN_KEY   = '<private key path>'
node test/live.mjs
node test/selftest.mjs

Current state: 89 host-free unit cases plus 25 live end-to-end cases against a Kali and a Windows 10 target.

Package layout

package.json            bundle manifest (dsh.bundle.patch points at cordis.patch.yml)
cordis.patch.yml        Loader row definition (id: ssh-vault)
index.js                plugin entry and the four model-facing tools
client.js               browser half: the Settings → SSH Connections page and the /ssh command surface
lib/vault-api.js        same-origin JSON routes behind the settings page
lib/vault.js            AES-256-GCM vault + DPAPI / scrypt key protection
lib/ssh.js              OpenSSH driver: argument construction, askpass, attribution, wait/detach scripts
lib/background.js       ctx.jobs background task adapter
scripts/set-secret.mjs  offline password entry (neither DSH nor the model is involved)
locale/{zh,en}.json     plugin manager title and description
icon.svg                plugin card icon
README.md               this file (English)
README.zh-CN.md         中文说明
CHANGELOG.md            version history
CONTRIBUTING.md         red lines, code style, testing requirements
SECURITY.md             security boundaries and vulnerability reporting
LICENSE                 MIT
test/                   regression; the first three need no host, the rest need a real target (not shipped)
dist/                   build artifacts, tgz / zip (not shipped)

The published file list is the files allowlist in package.json. Repack after changing files:

$env:npm_config_cache = "$PWD\.npm-cache"
npm pack --pack-destination dist
Remove-Item .npm-cache -Recurse -Force

Contributing

npm test

Version history is in CHANGELOG.md; security boundaries and reporting are in SECURITY.md.

License

MIT

Ssh Vault

兼容性与来源证明

版本

相关插件

Ssh Vault

README

dsh-ssh-vault

Tools

Install

Requirements

Option A — install from a directory (recommended)

Option B — install from an archive

Local development

Security model

What is on disk

Key protection

How the password reaches ssh

Explicit boundaries

Settings UI

/ssh in the conversation

Usage

Long tasks: remote detach + condition waiting

Privileged work: sudo without the conversation

Passwords that never pass through the model: offline entry (recommended)

Passwords that never pass through the conversation: credentialRef

Out-of-band management: binding the source address

Windows targets and restricted environments

Set the shell to cmd or powershell

Private keys: a public key cannot log in, and permissions must be tight

Where Windows administrators' authorized_keys live

Readable error paths

known_hosts and user configuration

Pipelines that hide output

Configuration

Troubleshooting

Tests

Package layout

Contributing

License

兼容性与来源证明

版本

相关插件

相关插件

相关插件

README

dsh-ssh-vault

Tools

Install

Requirements

Option A — install from a directory (recommended)

Option B — install from an archive

Local development

Security model

What is on disk

Key protection

How the password reaches ssh

Explicit boundaries

Settings UI

/ssh in the conversation

Usage

Long tasks: remote detach + condition waiting

Privileged work: sudo without the conversation

Passwords that never pass through the model: offline entry (recommended)

Passwords that never pass through the conversation: credentialRef

Out-of-band management: binding the source address

Windows targets and restricted environments

Set the shell to cmd or powershell

Private keys: a public key cannot log in, and permissions must be tight

Where Windows administrators' authorized_keys live

Readable error paths

known_hosts and user configuration

Pipelines that hide output

Configuration

Troubleshooting

Tests

Package layout

Contributing

License

`/ssh` in the conversation

`/ssh` in the conversation